Description:
materials are uniformly put on the mesh-belt by the feeder. The mesh-belt uses generally 12-60 mesh stainless steel wire net and it is drawn and moved inside the drier by a transmission device. The drier is composed of several units. For each unit, the hot air is circulated separately. Some exhausted gas is discharged with a special moisture elimination blower. The waste gas is controlled through an adjustment valve. The hot air passes through the mesh-belt covered with the material from the top to the bottom or from the bottom to the top and this will complete the heat and mass transfer process.
Features：
In mesh belt dryer system, the following data can be special set and adjusted in order to achieve best drying effect: heating temperature,air flow,staying time.Agility specified : we can add mesh belt washing system and product cooling system in mesh belt dryer system.Agility operating: after conveying on mesh belt, wet material is dried in a total sealed chamber during whole drying process. Working condition is good because the system do not have powder leaking out side. When wet material loaded in conveying belt, relative position between each single material is quite stable.